|
826 EPOXY RESIN
826 is a high purity liquid resin, which is manufactured
from bisphenol-A and epichlorohydrin. It is recognized
as a standard form of variations epoxy resin, which has
been developed. Cured 826 always offers good physical
and mechanical properties in applications, such as
maximum mechanical strength, good chemical resistance
and excellent heat resistance, etc.
828 EPOXY RESIN
828 is a high purity liquid resin, which is manufactured
from bisphenol-A and epichlorohydrin. It is recognized
as a standard form of variations epoxy resin, which has
been developed. Cured 828 always offers good physical
and mechanical properties in applications, such as
maximum mechanical strength, good chemical resistance
and excellent heat resistance, etc.
SOLID EPOXY RESIN 3002
General Description :
3002 is a solid epoxy resin based on Bisphenol-A and
Epichlorohydrin. It is
suitable to use for the protection of metal and
concrete, at room temperature
cure with polyamine or polyamide resins.
SOLID EPOXY RESIN 3007K
General Description :
3007K is an unmodified Bisphenol-A type solid Epoxy Rein
designed for use
in high performance, one-package baking finishes
coatings based on the resin produce films with
outstanding flexibility and adhesion as well as
exceptional resistance to chemicals and solvents.
Typical uses are process equipment coating enamels,
collapsible tube coatings can coating metal furniture
finishes and wire enamels.
SOLID EPOXY RESIN 3009
General Description :
3009 is a solid epoxy resin produce from Bisphenol-A and
Epichlorohydrin,
using in the manufacture of epoxy-phenolic and
epoxy-amino stoving paint
systems, mainly as can coating, linings for tubes and
drums with a high
performance and chemically resistant finishes.
The high hydroxyl content enables to be used for the
preparation of two
component paints, using polyisocyanate as curing agent.
 TOP
OF PAGE
|
|
Liquid
Polysulfide Polymer LP-32 is widely used as the base for
sealant applied to aircraft buildings, marine vessels,
automobiles, canals highways and glass insulation. LP-32
polymer can be cured in place at room temperature to
solid rubber without shrinkage. Cured polymer display
excellent stress-strain properties and solvent
resistance.
TOP
OF PAGE
|
